Advanced Two-Phase Heat Exchangers for Environmental Control
Navy SBIR 2014.1 - Topic N141-068
ONR - Ms. Lore Anne Ponirakis - [email protected]
Opens: Dec 20, 2013 - Closes: Jan 22, 2014

N141-068 TITLE: Advanced Two-Phase Heat Exchangers for Environmental Control

TECHNOLOGY AREAS: Ground/Sea Vehicles

OBJECTIVE: Develop compact heat transfer technologies to improve the performance of two-phase heat exchangers.

DESCRIPTION: Tube-fin heat exchangers are used to acquire or reject heat in a wide range of military and commercial thermal control systems, including ground and sea-based environmental control units, refrigeration systems, and waste heat regeneration systems. As power-density of tactical systems continue to increase, the use of two-phase thermal control systems is becoming more widespread due to improved thermal capacity when cooling or heating through the latent heat of a working fluid. Improving the effectiveness of two-phase heat exchangers used to transfer heat between the working fluids and air streams will lead to reductions in size, weight, and power consumption of military environmental control systems.

Improved heat exchanger designs utilizing microchannels, plate-fin configurations, and surface enhancements offer performance advantages over traditional tube-fin heat exchangers, but have not yet been fully utilized in many military and commercial systems. While developers have incorporated these improvements in single-phase systems, they have yet to be utilized reliably with two-phase systems. This is largely due to two-phase flow maldistribution and condensation build-up in the heat exchanger, which results in poor heat transfer performance, as well as high manufacturing costs.

Technologies are sought to improve the volumetric heat transfer performance over tube-fin heat exchangers while maintaining flow rates, temperatures, and differential pressures characteristic of heat exchangers used for environmental control. Methods to ensure proper distribution of a two-phase mixture at the entrance to multiple fluid passages and through the device must be proven.

PHASE I: Develop concepts to provide improved heat transfer performance over conventional heat exchangers and provide a uniform distribution of a two-phase working fluid at the inlets to multiple fluid passages. Validate design performance through analytical modeling or subscale demonstration of components as appropriate.

PHASE II: Demonstrate a working prototype of an evaporator sized to a 5-ton (60,000 BTU/hr) Environmental Control Unit. Experimentally validate the unit�s performance over a variety of refrigerant flow rates and inlet qualities, assuming an air side 80/67 �F dry bulb/wet bulb temperature and 2000 cfm. Complete a cost analysis of concepts established to ensure the selected technology is competitive with tube-fin manufacturing processes.

PHASE III: Optimize the concept design for manufacturability and heat transfer performance using the knowledge gained during Phases I and II. This heat exchanger must meet military unique requirements such as corrosion resistance, shock and vibration. Perform detailed design and fabrication of evaporator for transition into advanced environmental control systems demonstrations. Conduct extended testing to verify performance.

PRIVATE SECTOR COMMERCIAL POTENTIAL/DUAL-USE APPLICATIONS: Increasing the effectiveness of two-phase heat exchangers provides an enabling technology to reduce size and weight, as well as improve the energy efficiency, of commercial HVAC systems.

REFERENCES:
1. Cho H., Cho K., "Performance comparison of microchannel evaporators with refrigerant R-22," Journal of Mechanical Science and Technology, 21 (11), pp. 1926-1934 (2007).

2. Qi, Z., Chen, J., Radermacher, R., "Investigating performance of new mini-channel evaporators", Applied Thermal Engineering, 29 (17-18), pp. 3561-3567 (2009).

3. Qi Z., Zhao Y., Chen J., "Performance enhancement study of mobile air conditioning system using microchannel heat exchangers," International Journal of Refrigeration, 33 (2), pp. 301-312 (2010).

4. Jha, V., Dessiatoun, S., Ohadi, M., Al Hajri E., "Experimental Characterization of Heat Transfer and Pressure Drop Inside a Tubular Evaporator Utilizing Advanced Microgrooved Surfaces," Journal of Thermal Science and Engineering Applications 4 (4), 041009 (2012).

5. http://www.marcorsyscom.usmc.mil/sites/pdmeps/ECU.asp

KEYWORDS: Thermal Management; Heat Exchanger; Two-Phase Cooling; Evaporator; Condenser

** TOPIC AUTHOR (TPOC) **
DoD Notice:  
Between November 20 and December 19 you may talk directly with the Topic Authors (TPOC) to ask technical questions about the topics. Their contact information is listed above. For reasons of competitive fairness, direct communication between proposers and topic authors is
not allowed starting Dec 20, 2013, when DoD begins accepting proposals for this solicitation.
However, proposers may still submit written questions about solicitation topics through the DoD's SBIR/STTR Interactive Topic Information System (SITIS), in which the questioner and respondent remain anonymous and all questions and answers are posted electronically for general viewing until the solicitation closes. All proposers are advised to monitor SITIS (14.1 Q&A) during the solicitation period for questions and answers, and other significant information, relevant to the SBIR 14.1 topic under which they are proposing.

If you have general questions about DoD SBIR program, please contact the DoD SBIR Help Desk at (866) 724-7457 or email weblink.