Metrology of Visibly Transparent Large Aspheric Optics
Navy SBIR 2015.2 - Topic N152-106
NSMA - Mr. John Keiran - [email protected]
Opens: May 26, 2015 - Closes: June 24, 2015

N152-106   TITLE:  Metrology of Visibly Transparent Large Aspheric Optics

TECHNOLOGY AREAS:  Air Platform, Materials/Processes, Sensors

ACQUISITION PROGRAM:  UCLASS, The Carrier Unmanned Aviation Program Office PMA-268

OBJECTIVE:  Develop a method and hardware to measure the optical figure and transmitted wavefront error of large aspheric optics including conformal windows, aerodynamic domes, and corrector optics. Measurements should have a precision of 0.1 micron or better. Candidate materials will have suitable transparency at a wavelength of one micron for optical measurements.

DESCRIPTION:  Aspheric optics represent the next generation in electro-optic sensor windows allowing for windows that conform to the local shape of an aircraft moldline, domes that reduce drag in missiles, and optical elements that correct for distortions produced by conformal windows and aerodynamic domes. The objective of this project is to develop metrology methods and hardware to measure the optical figure and transmitted wavefront error of large conformal windows, aerodynamic domes, and optical corrector elements to provide feedback for optical figure correction by an optics shop. Methodology development could begin with glass or fused silica specimens but is expected to move to spinel by Phase II. Possible candidate shapes include toroidal windows, tangent ogive domes, and arched optical corrector elements. Specimens to be measured are expected to have a footprint up to 24x24 inches. Metrology methods should have a precision of 0.1 micron or better.

PHASE I:  Evaluate the feasibility of measuring the optical figure and transmitted wavefront of aspheric optics including conformal windows, aerodynamic domes, and corrector optics. Demonstrate breadboard capability to precisely measure (0.5 micron) freeform shapes such as a 4x4 inch toroidal window provided by the government. Produce a design capable of measuring large aspheric optics up to 24x24x24 inches. Instruments that operate at visible or one micron wavelengths are acceptable. Measurement must be capable of handling optics with little to no symmetry. A method capable of measuring objects whose two surfaces deviate more than 5 degrees from parallel could be useful but is not required.

PHASE II:  Build and demonstrate the instrument designed in Phase I capable of measuring aspheric optics up to 24x24x24 inches. Specimens for measurement possibly made of glass or plastic will be provided by the government. Measurement results must be in a form that provides feedback to an optical polishing shop for figure correction. The measurement goal is a precision of 0.1 micron or better. The intent for this instrument is to be used on the floor of an optics shop making large aspheric and conformal optics.

PHASE III:  Implement commercial metrology capabilities. Manufacture an instrument for sale to optics manufacturers to measure large aspheric optics. Alternatively, provide a commercial service to measure aspheric optics.

REFERENCES:  

1.   M. Gutin, O. Gutin, X.-M. Wang, and D. Ehlinger, “Interferometric Tomography of Conformal Optics,” Proc. SPIE 2013, Volume 8708 paper 870814. (http://www.spie.org/x1848.xml)

2.   S. DeFisher, E. Fess, and F. Wolfs, “Freeform and Conformal Optical Manufacturing,” Proc. SPIE 2013, Volume 8708 paper 870813. (http://www.spie.org/x1848.xml)

3.   S. DeFisher, M. Bechtold, and D. Mohring, “A Non-Contact Surface Measurement System for Freeform and Conformal Optics,” Proc. SPIE 2011, Volume 8016, paper 80160W. (http://www.spie.org/x1848.xml)

4.   R. Henselmans, L. Cacace, G. Kramer, N. Rosielle, and M. Steinbuch, “Nanometer Level Freeform

Surface Measurements with NANOMEFOS Non-Contact measurement Machine,” Proc. SPIE 2009, Volume 7426 paper 742606. (http://www.spie.org/x1848.xml)

KEYWORDS:  Metrology; conformal windows; aerodynamic domes; Measurement; Large Optics; Aspheric

** TOPIC AUTHOR (TPOC) **
DoD Notice:  
Between April 24 and May 25, 2015 you may talk directly with the Topic Authors (TPOC) to ask technical questions about the topics. Their contact information is listed above. For reasons of competitive fairness, direct communication between proposers and topic authors is
not allowed starting May 26, 2015 , when DoD begins accepting proposals for this solicitation.
However, proposers may still submit written questions about solicitation topics through the DoD's SBIR/STTR Interactive Topic Information System (SITIS), in which the questioner and respondent remain anonymous and all questions and answers are posted electronically for general viewing until the solicitation closes. All proposers are advised to monitor SITIS (15.2 Q&A) during the solicitation period for questions and answers, and other significant information, relevant to the SBIR 15.2 topic under which they are proposing.

If you have general questions about DoD SBIR program, please contact the DoD SBIR Help Desk at 800-348-0787 or [email protected].


Return

Offical DoD SBIR FY-2015.1 Solicitation Site:
www.acq.osd.mil/osbp/sbir/solicitations/sbir20152/index.shtml