AI/ML for Additive Manufacturing Defect Detection

Navy SBIR 22.2 - Topic N222-117
ONR - Office of Naval Research
Opens: May 18, 2022 - Closes: June 15, 2022 (12:00pm est)    [ View Q&A ]

N222-117 TITLE: AI/ML for Additive Manufacturing Defect Detection

OUSD (R&E) MODERNIZATION PRIORITY: Artificial Intelligence (AI)/Machine Learning (ML)

TECHNOLOGY AREA(S): Materials / Processes

OBJECTIVE: Develop Artificial Intelligence/Machine Learning (AI/ML) based software tools to help identify additive manufacturing (AM) defects from in-situ sensor-based data. Capture sufficient process control and monitoring data in real-time to later on, through AI/ML analysis, help improve the reliability, speed, and cost of post processing inspections by knowing where and what to look for ahead of time.

DESCRIPTION: There is continued advancement in the use of in-situ sensing in metal AM processes. This includes the use of in-situ sensor data to help develop stable AM process windows and more recently the use of sensors to help control the AM process through feed forward control or other real-time adaptive control methodologies. Advanced sensing capabilities for metal AM includes cameras and sensor arrays with increased temporal and spatial resolution, and cameras with adaptable fields of view and broader thermal sensing range. Advances are taking place not just in the specification of the sensor arrays used, but also on the types of sensing modalities incorporated into the AM process chamber. Aside from the more traditional infrared (IR) and visual infrared (VIS) cameras mentioned previously, other sensor types include optical emission spectrometers, acoustic and vibration spectral sensors, laser profilometers, and others. Additionally, sensors within the AM system may include power monitoring, galvo locations, oxygen monitoring, etc.

Despite all the progress achieved in process monitoring and control to improve the quality of metal AM parts, very little progress has been accomplished in intelligently fusing all the data collected during the AM process to help reduce the cost and increase the reliability of post-fabrication nondestructive evaluation (NDE) techniques. In particular, X-Ray Tomography remains the gold standard for AM part inspections, though it can be costly and ill-suited for large components. This SBIR topic explores the use of AI/ML tools to help identify the location and type of potential defects (with statistical margins of error and confidence intervals). Even though the objective of the topic is to use existing process monitoring and control data to develop AI/ML algorithms, the Navy is open to new and creative hardware enhancements that can improve the reliability of AI/ML predictions. Enhancements such as replacing a sensor by an array of sensors, adding a new sensing modality or advanced data processing hardware card.

PHASE I: Define, design, and develop the AI/ML methodology for defect type identification and localization (with statistical bounds). Identify the metal powder bed fusion system that the proposer plans to upgrade with AI/ML tools. Provide a list of all the sensors and control parameters (including ones already available in the system and additional ones) to fuse via the AI/ML framework. This will include the rationale for the selections \. Indicate if there will be modification(s) or addition(s) of new sensing modalities/other hardware for added defect identification reliability. As part of the Phase I AI/ML algorithm development effort, simple sample coupons with embedded defects (e.g., porosity, hot cracking, keyholing, etc.) should be fabricated. Define the ground truth methodology to be used (i.e., coupon sectioning, x-ray tomography) for AI/ML training purposes. Provide a Phase II plan.

PHASE II: Focus on increased validation of AI/ML tools with aggregated large data sets from multiple sensors. This may also include aspects of transfer learning. Validation and comparison to NDE/I techniques will also be emphasized for Phase II. Phase II will also focus on key performance property impacts based on defect population.

PHASE III DUAL USE APPLICATIONS: Validate AI/ML tools for a different metal alloy to test AI/ML tools. Engagement with an OEM is highly encouraged. Commercial applications of additive manufacturing can be found in a wide range of commercial sectors such as: aerospace, shipping, transportation, rail, automotive, medical, etc. This technology would be applicable to identifying defects in critical metallic applications across all the sectors.

REFERENCES:

  1. Petrich, J.; Snow, Z.; Corbin, D. and Reutzel, E.W. "Multi-modal sensor fusion with machine learning for data-driven process monitoring for additive manufacturing." - Additive Manufacturing, Volume 48, Part B, December 2021, 102364. https://www.sciencedirect.com/science/article/abs/pii/S2214860421005182
  2. Qi, X.; Chen, G.; Li, Y.; Cheng, X. and Li, C. "Applying neural-network-based machine learning to additive manufacturing: current applications, challenges, and future perspectives." Engineering, Volume 5, Issue 4, August 2019, pp/ 721-729. https://www.sciencedirect.com/science/article/pii/S2095809918307732
  3. Westphal, Erick and Seitz, Hermann. "A machine learning method for defect detection and visualization in selective laser sintering based on convolutional neural networks." Additive Manufacturing, Volume 41, May 2021, 101965. https://www.sciencedirect.com/science/article/pii/S2214860421001305

KEYWORDS: additive manufacturing; AM; artificial intelligence/machine learning; AI/ML; nondestructive evaluation; defects; discontinuities

** TOPIC NOTICE **

The Navy Topic above is an "unofficial" copy from the overall DoD 22.2 SBIR BAA. Please see the official DoD Topic website at www.defensesbirsttr.mil/SBIR-STTR/Opportunities/#announcements for any updates.

The DoD issued its 22.2 SBIR BAA pre-release on April 20, 2022, which opens to receive proposals on May 18, 2022, and closes June 15, 2022 (12:00pm est).

Direct Contact with Topic Authors: During the pre-release period (April 20, 2022 thru May 17, 2022) proposing firms have an opportunity to directly contact the Technical Point of Contact (TPOC) to ask technical questions about the specific BAA topic. Once DoD begins accepting proposals on May 18, 2022 no further direct contact between proposers and topic authors is allowed unless the Topic Author is responding to a question submitted during the Pre-release period.

SITIS Q&A System: After the pre-release period, proposers may submit written questions through SITIS (SBIR/STTR Interactive Topic Information System) at www.dodsbirsttr.mil/topics-app/, login and follow instructions. In SITIS, the questioner and respondent remain anonymous but all questions and answers are posted for general viewing.

Topics Search Engine: Visit the DoD Topic Search Tool at www.dodsbirsttr.mil/topics-app/ to find topics by keyword across all DoD Components participating in this BAA.

Help: If you have general questions about DoD SBIR program, please contact the DoD SBIR Help Desk via email at [email protected]


** TOPIC Q&A **
Questions answered 5/31/22
Q1. Will Direct to Phase II submissions be considered for this topic?
A1. No, this topic is intended for Phase I proposal submissions only.
Q2. Can a performer propose a cold spray system instead of a metal powder bed fusion system to upgrade with AI/ML tools?
A2. No.
Q3. Is it required to perform a hardware demonstration during Phase I, or can we use data from our prior hardware integration demonstrations?
A3. A software demonstration is required.
Questions answered 4/21/22
Q1. Can Direct Energy Deposition (DED) AM techniques be applied to this topic?
A1. Yes
Q2. Can Phase I results be synthetic data derived from models/simulations?
A2. No.
[ Return ]